Before you contact a waterproofing contractor in Singapore to address your home’s leakages, there are several checks and first aid that can be performed. In this article, we take a look at some of these steps.
Inappropriate Installation
An incorrectly set up liner can additionally allow water leakage via. As water traverses the mortar bed, it at some point settles on the liner where it heads toward the secondary drain. If there are any openings in the liner or the seams are incorrectly connected, water can seep past and get into the wood substratum causing rot, mould, and various other issues related to water damage.
This issue can show up years after a shower is installed and is in some cases very hard to spot.
A sure fire method of examining a shower floor to see if it leaks is to place a drain stop in the shower drain and load the pan up with water to the level of where the wall starts. If the water settles for 10 hours without a leakage appearing below the shower or the ceiling beneath, it is likely that the liner is undamaged and is safeguarding your house from water damages.
Inspect your water meter
Among the most convenient methods to tell if you have a leakage in some part of your plumbing is to examine the water meter. To do this, you’ll first need to turn off all the water in your home. Shut off all faucets, and make sure the dishwasher and washing machine are not running. Next, watch the meter and see if it starts to change. If it does, you likely have a fast-moving leakage. If the meter does not shift instantly, wait two hours and examine it once more. If it has changed in spite of all the water shut off, you may be sheltering a slower leak. The leakage could be any place after the meter, or perhaps underground. Keep in mind that all piping after the meter is a house owner’s responsibility.
Underground and Hidden Pipes
Often the dripping pipeline might be below the ground or concealed behind a wall surface. That includes basements, ceilings, concrete slabs, asphalt streets etc. Determining a surprise pipe as the origin of a leak is not always simple, but here are some methods you can do it.
Carry out the meter test. First, inspect the meter measuring the water being utilized in your house and observe how it shifts. After that shut off every tap and toilet, plus any other home appliances attached to water within the property. Check the meter again to see if it is shifting. If it is, you have a leak somewhere in your home and it could be below ground. Or else, the meter shouldn’t move in any way as soon as every appliance is turned off.
Molds, mildew and decaying timber in an area are also impending indicators of leakages in below ground or concealed pipes such as those behind a wall. It is common to locate greenish molds and mildew expanding on such wall surfaces or floors and if you see them, recognize that there is an opportunity of a leak in the pipeline behind that location.